Bultaco


The name Bultaco comes from combining the first four letters of the founder's (Sr. Francisco Xavier Bultó's) surname with the last three of his nickname "Paco". Even though they started racing on pavement, Bultaco achieved dominance in off-road competition.

For general parts, please see the product index on the left.

Bultaco Models
Parts available for Bultaco
Viewing 81 to 90 (109 Total)
Sort by:


Chain Tensioner Rubbing Block

Your choice of a double-sided or fully-enclosed (pictured on right) replacement chain tensioner rubbing blocks. The bolt spacing on the double-sided is 40mm and on the enclosed is 31mm.

Chain Tensioner Rubbing Block - $14.00

Your choice of a double-sided or fully-enclosed (pictured on right) replacement chain tensioner rubbing blocks. The bolt spacing on the double-sided is 40mm and on the enclosed is 31mm.

Motorcycle Model Alpina, Any, Sherpa T, TY175, TY250
Motorcycle Manufacturer Any, Bultaco, Yamaha
   
Chain Tensioner Rubbing Block
Price $14.00
Description

Your choice of a double-sided or fully-enclosed (pictured on right) replacement chain tensioner rubbing blocks. The bolt spacing on the double-sided is 40mm and on the enclosed is 31mm.

Motorcycle Model Alpina, Any, Sherpa T, TY175, TY250
Motorcycle Manufacturer Any, Bultaco, Yamaha
Ignition Coil, Universal

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Ignition Coil, Universal - $18.00

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Motorcycle Model Alpina, B25, B40, B44, B50, C15, Cota, Griffon, Matador, Sherpa T, Stormer, Tiger Cub, TL125, TL250, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Cotton, CZ, Greeves, Husqvarna, Maico, Montesa, Ossa, Triumph, Villiers, Yamaha
   
Ignition Coil, Universal
Price $18.00
Description

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Motorcycle Model Alpina, B25, B40, B44, B50, C15, Cota, Griffon, Matador, Sherpa T, Stormer, Tiger Cub, TL125, TL250, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Cotton, CZ, Greeves, Husqvarna, Maico, Montesa, Ossa, Triumph, Villiers, Yamaha
Lever Covers, Bultaco
Lever covers suitable for 1970s Spanish bikes with Amal alloy control levers. Sold as a pair.
Lever Covers, Bultaco - $18.00
Lever covers suitable for 1970s Spanish bikes with Amal alloy control levers. Sold as a pair.
Motorcycle Model Alpina, Cota, Matador, Phantom, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco, Montesa, Ossa
   
Lever Covers, Bultaco
Price $18.00
Description Lever covers suitable for 1970s Spanish bikes with Amal alloy control levers. Sold as a pair.
Motorcycle Model Alpina, Cota, Matador, Phantom, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco, Montesa, Ossa
Bultaco Tank Badge

Made of thick plastic, model years 1973-on. Sold individually. Your choice of colors.

Bultaco Tank Badge - $14.00

Made of thick plastic, model years 1973-on. Sold individually. Your choice of colors.

Motorcycle Model Alpina, Matador, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
   
Bultaco Tank Badge
Price $14.00
Description

Made of thick plastic, model years 1973-on. Sold individually. Your choice of colors.

Motorcycle Model Alpina, Matador, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
Bultaco Front Hub Dust Cover

Rubber dust cover to fit the small side of ~1973-later Pursang, Frontera and Alpina conical alloy front hubs. OEM #107.04-029.

Bultaco Front Hub Dust Cover - $8.00

Rubber dust cover to fit the small side of ~1973-later Pursang, Frontera and Alpina conical alloy front hubs. OEM #107.04-029.

Motorcycle Model Alpina, Pursang
Motorcycle Manufacturer Bultaco
   
Bultaco Front Hub Dust Cover
Price $8.00
Description

Rubber dust cover to fit the small side of ~1973-later Pursang, Frontera and Alpina conical alloy front hubs. OEM #107.04-029.

Motorcycle Model Alpina, Pursang
Motorcycle Manufacturer Bultaco
Grommets, Bultaco Sidepanel

Used under the fixing screws on several Pursang, Sherpa T and Alpina models. The o.d. of this rubber washer is 17mm. Sold individually.

Grommets, Bultaco Sidepanel - $0.50

Used under the fixing screws on several Pursang, Sherpa T and Alpina models. The o.d. of this rubber washer is 17mm. Sold individually.

Motorcycle Model Alpina, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
   
Grommets, Bultaco Sidepanel
Price $0.50
Description

Used under the fixing screws on several Pursang, Sherpa T and Alpina models. The o.d. of this rubber washer is 17mm. Sold individually.

Motorcycle Model Alpina, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
Bultaco Engine Rubber Parts
Cylinder fin dampers for square-barrel engines, sold individually. Also, your choice of two styles of five-speed ignition-wire grommet and the rubber washers (not pictured) for gearbox and primary fill-plugs.
Bultaco Engine Rubber Parts - $2.00
Cylinder fin dampers for square-barrel engines, sold individually. Also, your choice of two styles of five-speed ignition-wire grommet and the rubber washers (not pictured) for gearbox and primary fill-plugs.
Motorcycle Model Alpina, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
   
Bultaco Engine Rubber Parts
Price $2.00
Description Cylinder fin dampers for square-barrel engines, sold individually. Also, your choice of two styles of five-speed ignition-wire grommet and the rubber washers (not pictured) for gearbox and primary fill-plugs.
Motorcycle Model Alpina, Pursang, Sherpa T
Motorcycle Manufacturer Bultaco
Bar Ends, Aluminum

Protects handgrips and throttle tubes from crash-damage. Durable aluminum-alloy construction, made in the USA. New design fits both aluminum-alloy and steel handlebars; sold as a pair.

Bar Ends, Aluminum - $14.00

Protects handgrips and throttle tubes from crash-damage. Durable aluminum-alloy construction, made in the USA. New design fits both aluminum-alloy and steel handlebars; sold as a pair.

Motorcycle Model Anglian, Any, B40, C15, Cota, HT5, M.A.R., RL250, Scottish, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TY175, TY250, TY80
Motorcycle Manufacturer Any, Ariel, BSA, Bultaco, Cotton, Greeves, Honda, Kawasaki, Matchless, Montesa, Ossa, Suzuki, Triumph, Yamaha
   
Bar Ends, Aluminum
Price $14.00
Description

Protects handgrips and throttle tubes from crash-damage. Durable aluminum-alloy construction, made in the USA. New design fits both aluminum-alloy and steel handlebars; sold as a pair.

Motorcycle Model Anglian, Any, B40, C15, Cota, HT5, M.A.R., RL250, Scottish, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TY175, TY250, TY80
Motorcycle Manufacturer Any, Ariel, BSA, Bultaco, Cotton, Greeves, Honda, Kawasaki, Matchless, Montesa, Ossa, Suzuki, Triumph, Yamaha
Killbutton, Magura-Type

Replica Magura rubber-covered killbutton looks great, at an affordable price.

Killbutton, Magura-Type - $10.00

Replica Magura rubber-covered killbutton looks great, at an affordable price.

Motorcycle Model Any
Motorcycle Manufacturer Any, Bultaco, Husqvarna, Maico, Penton
   
Killbutton, Magura-Type
Price $10.00
Description

Replica Magura rubber-covered killbutton looks great, at an affordable price.

Motorcycle Model Any
Motorcycle Manufacturer Any, Bultaco, Husqvarna, Maico, Penton
Petcock, Bultaco/Ossa/Montesa

Nice, Italian made fuel tap fits most Spanish bikes, 12mm x 1.5. This is also used on many current aftermarket tanks.

Petcock, Bultaco/Ossa/Montesa - $28.00

Nice, Italian made fuel tap fits most Spanish bikes, 12mm x 1.5. This is also used on many current aftermarket tanks.

Motorcycle Model Any
Motorcycle Manufacturer Bultaco, Montesa, Ossa
   
Petcock, Bultaco/Ossa/Montesa
Price $28.00
Description

Nice, Italian made fuel tap fits most Spanish bikes, 12mm x 1.5. This is also used on many current aftermarket tanks.

Motorcycle Model Any
Motorcycle Manufacturer Bultaco, Montesa, Ossa
 
www.ka4alka-ua.com