Other Makes


Throughout the years, many motorcycles makes have come and gone. Some companies were absorbed by others, and others just faded away. Some of the lesser-known brands have parts listed below. If you don't see what you need, don't hesitate to give us a call and we'll help.

For general parts, please see the product index on the left.

Viewing 201 to 210 (282 Total)
Sort by:


Throttle, Domino Trials

All-plastic-construction, slow-turn trials throttle, very popular with modern trials riders. Two models are available, both are intended for trials use. The black throttle tube is very slow turn, and used by most vintage riders who choose Domino. The white throttle tube version is quicker, and preferred by expert-level riders.

Throttle, Domino Trials - $29.00

All-plastic-construction, slow-turn trials throttle, very popular with modern trials riders. Two models are available, both are intended for trials use. The black throttle tube is very slow turn, and used by most vintage riders who choose Domino. The white throttle tube version is quicker, and preferred by expert-level riders.

Motorcycle Model Alpina, Anglian, Any, B25, B40, C15, HT5, M.A.R., RL250, Scottish, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TY175, TY250, TY80
Motorcycle Manufacturer Any, Ariel, BSA, Bultaco, Cotton, Greeves, Honda, Kawasaki, Matchless, Montesa, Ossa, Suzuki, Triumph, Yamaha
   
Throttle, Domino Trials
Price $29.00
Description

All-plastic-construction, slow-turn trials throttle, very popular with modern trials riders. Two models are available, both are intended for trials use. The black throttle tube is very slow turn, and used by most vintage riders who choose Domino. The white throttle tube version is quicker, and preferred by expert-level riders.

Motorcycle Model Alpina, Anglian, Any, B25, B40, C15, HT5, M.A.R., RL250, Scottish, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TY175, TY250, TY80
Motorcycle Manufacturer Any, Ariel, BSA, Bultaco, Cotton, Greeves, Honda, Kawasaki, Matchless, Montesa, Ossa, Suzuki, Triumph, Yamaha
Axle, Front, 20/15mm

Front axle fits many vintage-era forks. The main axle is 15mm diameter, with a 20mm shoulder. The overall tip-to-tip length is 10 inches; the grip-length is approximately 8 inches minimum and 8-7/8 inches maximum. Thread is 1/2-20 UNF.

Axle, Front, 20/15mm - $30.00

Front axle fits many vintage-era forks. The main axle is 15mm diameter, with a 20mm shoulder. The overall tip-to-tip length is 10 inches; the grip-length is approximately 8 inches minimum and 8-7/8 inches maximum. Thread is 1/2-20 UNF.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Axle, Front, 20/15mm
Price $30.00
Description

Front axle fits many vintage-era forks. The main axle is 15mm diameter, with a 20mm shoulder. The overall tip-to-tip length is 10 inches; the grip-length is approximately 8 inches minimum and 8-7/8 inches maximum. Thread is 1/2-20 UNF.

Motorcycle Model Any
Motorcycle Manufacturer Any
Amal Slide (Throttle Valve)
Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Amal Slide (Throttle Valve) - $30.00
Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Amal Slide (Throttle Valve)
Price $30.00
Description Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Motorcycle Model Any
Motorcycle Manufacturer Any
Spark Arrestor Screen, Universal
USFS-approved spark arrestor insert, by FMF. Fits into a 46mm (1.655") hole, with a 2" o.d. flange. The flange is enscripted with the legal jargon. Good choice for custom-fabrication.
Spark Arrestor Screen, Universal - $30.00
USFS-approved spark arrestor insert, by FMF. Fits into a 46mm (1.655") hole, with a 2" o.d. flange. The flange is enscripted with the legal jargon. Good choice for custom-fabrication.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Spark Arrestor Screen, Universal
Price $30.00
Description USFS-approved spark arrestor insert, by FMF. Fits into a 46mm (1.655") hole, with a 2" o.d. flange. The flange is enscripted with the legal jargon. Good choice for custom-fabrication.
Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor, MikCarb, 24mm
India-made "MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Carburetor, MikCarb, 24mm - $30.00
India-made "MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor, MikCarb, 24mm
Price $30.00
Description India-made "MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
Lucas Headlight Reflector/Lens Unit, 5-3/4

Genuine Lucas 5-3/4-inch headlamp beam unit with pilot aperture. Uses BPF-style bulb, typical for most classic British motorcycles (not included). 

Lucas Headlight Reflector/Lens Unit, 5-3/4" - $30.00

Genuine Lucas 5-3/4-inch headlamp beam unit with pilot aperture. Uses BPF-style bulb, typical for most classic British motorcycles (not included). 

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Lucas Headlight Reflector/Lens Unit, 5-3/4"
Price $30.00
Description

Genuine Lucas 5-3/4-inch headlamp beam unit with pilot aperture. Uses BPF-style bulb, typical for most classic British motorcycles (not included). 

Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Carburetor Adaptor Plate, Amal Manifold to Spigot Carb - $32.00

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb
Price $32.00
Description

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
Mounting Brackets, Billet, Front Number Plate

Aluminum-alloy front number plate mounting brackets for 35mm forks. Includes hardware, sold as a pair (enough for one bike).

Mounting Brackets, Billet, Front Number Plate - $32.00

Aluminum-alloy front number plate mounting brackets for 35mm forks. Includes hardware, sold as a pair (enough for one bike).

Motorcycle Model Any
Motorcycle Manufacturer Any, Maico
   
Mounting Brackets, Billet, Front Number Plate
Price $32.00
Description

Aluminum-alloy front number plate mounting brackets for 35mm forks. Includes hardware, sold as a pair (enough for one bike).

Motorcycle Model Any
Motorcycle Manufacturer Any, Maico
Rear Fender, Universal Plastic

Plastic rear fender, 6"wide by 28"long, patterned off a late-model Bultaco Sherpa T. Green is by special order; expect seven working days lead time.

Rear Fender, Universal Plastic - $35.00

Plastic rear fender, 6"wide by 28"long, patterned off a late-model Bultaco Sherpa T. Green is by special order; expect seven working days lead time.

Motorcycle Model Any, Cota, M.A.R., Sherpa T, Tiger Cub, TL125, TL250
Motorcycle Manufacturer Any, Bultaco, Honda, Kawasaki, Montesa, Ossa, Penton, Triumph
   
Rear Fender, Universal Plastic
Price $35.00
Description

Plastic rear fender, 6"wide by 28"long, patterned off a late-model Bultaco Sherpa T. Green is by special order; expect seven working days lead time.

Motorcycle Model Any, Cota, M.A.R., Sherpa T, Tiger Cub, TL125, TL250
Motorcycle Manufacturer Any, Bultaco, Honda, Kawasaki, Montesa, Ossa, Penton, Triumph
Air Filters, K&N
Air Filters, K&N - $35.00

K&N Air Filters have a history of being high-flow, easy-to-maintain filters. Their range of filters is massive. We stock only a few (see below), but can special-order anything they make (prices will vary). Please contact us with requirements.

Air Filters, K&N - $35.00

K&N Air Filters have a history of being high-flow, easy-to-maintain filters. Their range of filters is massive. We stock only a few (see below), but can special-order anything they make (prices will vary). Please contact us with requirements.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Air Filters, K&N
Price $35.00
Description

K&N Air Filters have a history of being high-flow, easy-to-maintain filters. Their range of filters is massive. We stock only a few (see below), but can special-order anything they make (prices will vary). Please contact us with requirements.

Motorcycle Model Any
Motorcycle Manufacturer Any
 
Виагра супер актив