Other Makes


Throughout the years, many motorcycles makes have come and gone. Some companies were absorbed by others, and others just faded away. Some of the lesser-known brands have parts listed below. If you don't see what you need, don't hesitate to give us a call and we'll help.

For general parts, please see the product index on the left.

Viewing 41to 50(244Total)
Sort by:


Cable Adjuster, Honda-Style
Alloy cable adjuster suitable for our CR Pro throttle, or OE Honda twistgrips. Machined from alloy, with cable slot; dust boot included.
Cable Adjuster, Honda-Style - $7.00
Alloy cable adjuster suitable for our CR Pro throttle, or OE Honda twistgrips. Machined from alloy, with cable slot; dust boot included.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cable Adjuster, Honda-Style
Price $7.00
Description Alloy cable adjuster suitable for our CR Pro throttle, or OE Honda twistgrips. Machined from alloy, with cable slot; dust boot included.
Motorcycle Model Any
Motorcycle Manufacturer Any
Cable Adjuster, Magura

Magura screw-in adjuster with 7mm thread, fits the split-perch lever and others. Accepts your choice of 6.5mm (1/4") or 8.2mm cable housing ferrule. Sold individually.

Cable Adjuster, Magura - $8.00

Magura screw-in adjuster with 7mm thread, fits the split-perch lever and others. Accepts your choice of 6.5mm (1/4") or 8.2mm cable housing ferrule. Sold individually.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
   
Cable Adjuster, Magura
Price $8.00
Description

Magura screw-in adjuster with 7mm thread, fits the split-perch lever and others. Accepts your choice of 6.5mm (1/4") or 8.2mm cable housing ferrule. Sold individually.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
Cable Guides for Number Plates

Keep your cable route tidy, your choice of black or white in color.

Cable Guides for Number Plates - $8.00

Keep your cable route tidy, your choice of black or white in color.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cable Guides for Number Plates
Price $8.00
Description

Keep your cable route tidy, your choice of black or white in color.

Motorcycle Model Any
Motorcycle Manufacturer Any
Cables, Clutch, Nylon-Lined, European

Attached is a list of the most-asked-for clutch cables in our line. This is by no means the end of the list, so if you need something you don't see here, please don't hesitate to ask.

Cables, Clutch, Nylon-Lined, European - $18.00

Attached is a list of the most-asked-for clutch cables in our line. This is by no means the end of the list, so if you need something you don't see here, please don't hesitate to ask.

Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, M.A.R., Matador, Metisse, Phantom, Pursang, Stiletto
Motorcycle Manufacturer Any, Bultaco, CZ, Husqvarna, Maico, Montesa, Ossa, Penton
   
Cables, Clutch, Nylon-Lined, European
Price $18.00
Description

Attached is a list of the most-asked-for clutch cables in our line. This is by no means the end of the list, so if you need something you don't see here, please don't hesitate to ask.

Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, M.A.R., Matador, Metisse, Phantom, Pursang, Stiletto
Motorcycle Manufacturer Any, Bultaco, CZ, Husqvarna, Maico, Montesa, Ossa, Penton
Cables, Custom

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Cables, Custom -

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cables, Custom
Price
Description

Need a hard-to-find cable? We can can usually make it from parts on-hand, but occasionally, we'll need to harvest hardware from a used cable to complete the process (the hardware can be replated prior to re-use). We can work from accurate dimensions, or from your sample. This is a one-off process, so a phone call might be necessary to get it all right.

Motorcycle Model Any
Motorcycle Manufacturer Any
Cables, Rear Brake, Pull Type
Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Cables, Rear Brake, Pull Type - $20.00
Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Motorcycle Model Any, Metisse, MkIII, MkIV, Pursang, TY250
Motorcycle Manufacturer Any, Bultaco, Rickman, Triumph, Yamaha
   
Cables, Rear Brake, Pull Type
Price $20.00
Description Bare-wire cable with clevis fitting at one end, 6mm threaded stud at the other. Measurement to end of threads. Other lengths available upon request.
Motorcycle Model Any, Metisse, MkIII, MkIV, Pursang, TY250
Motorcycle Manufacturer Any, Bultaco, Rickman, Triumph, Yamaha
Cables, Throttle, Elbow at Carb End

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Cables, Throttle, Elbow at Carb End - $24.00

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Cables, Throttle, Elbow at Carb End
Price $24.00
Description

This Motion Pro cable helps with limited-clearance situations. Elbow is approximately 45 degrees, the housing length from adjuster-to-adjuster is approximately 38-1/2 inches.

Motorcycle Model Any
Motorcycle Manufacturer Any
Cables, Throttle, Nylon-Lined

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Cables, Throttle, Nylon-Lined - $23.00

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
   
Cables, Throttle, Nylon-Lined
Price $23.00
Description

Our works-quality throttle cables are made in-house from only the finest materials to ensure your satisfaction for fit-and-function. We can produce throttle cables for an amazing arrary of applications; only our most popular are listed here. Please telephone with any other specific needs.

Motorcycle Model Any
Motorcycle Manufacturer Any, Husqvarna, Maico, Penton
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Carburetor Adaptor Plate, Amal Manifold to Spigot Carb - $32.00

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb
Price $32.00
Description

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor, MikCarb, 24mm
India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Carburetor, MikCarb, 24mm - $30.00
India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor, MikCarb, 24mm
Price $30.00
Description India-made"MikCarb" carburetor, made under license from Mikuni Japan. Appears to be new, with decent cable. 24mm flange-mount style, minimum stud spacing approximately 48mm. As-is, no jetting available.
Motorcycle Model Any
Motorcycle Manufacturer Any
 
Гидравлическая тележка читать на сайте.
Верстаки детальнее на сайте.
подробно

тележки