Carburetors

Get the gas to flow where it needs to go, in proper amounts. We also have an extensive inventory of carburetor parts which will eventually be shown here; until then, please telephone us with your needs.

Viewing 11 to 20 (50 Total)
Sort by:


Hose Clamp, Special Narrow Stainless

Nice, narrow (.350", or 8.9mm) hose clamps, to fit our inlet couplers and other limited-space situations. Not inexpensive, but well worth it. Sold individually.

Hose Clamp, Special Narrow Stainless - $3.95

Nice, narrow (.350", or 8.9mm) hose clamps, to fit our inlet couplers and other limited-space situations. Not inexpensive, but well worth it. Sold individually.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Hose Clamp, Special Narrow Stainless
Price $3.95
Description

Nice, narrow (.350", or 8.9mm) hose clamps, to fit our inlet couplers and other limited-space situations. Not inexpensive, but well worth it. Sold individually.

Motorcycle Model Any
Motorcycle Manufacturer Any
Honda TL250 Carburetor Rebuild Kit
Complete rebuild kit for the OE 1975-'76 Honda TL250 Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; main jet, #115; pilot jet, #38.
Honda TL250 Carburetor Rebuild Kit - $45.00
Complete rebuild kit for the OE 1975-'76 Honda TL250 Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; main jet, #115; pilot jet, #38.
Motorcycle Model TL250
Motorcycle Manufacturer Honda
   
Honda TL250 Carburetor Rebuild Kit
Price $45.00
Description Complete rebuild kit for the OE 1975-'76 Honda TL250 Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; main jet, #115; pilot jet, #38.
Motorcycle Model TL250
Motorcycle Manufacturer Honda
Honda TL125S Carburetor Rebuild Kit
Complete rebuild kit for the OE 1976 Honda TL125S (not for earlier models) Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle; needle, clip & retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #92; pilot jet, #35.
Honda TL125S Carburetor Rebuild Kit - $24.25
Complete rebuild kit for the OE 1976 Honda TL125S (not for earlier models) Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle; needle, clip & retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #92; pilot jet, #35.
Motorcycle Model TL125
Motorcycle Manufacturer Honda
   
Honda TL125S Carburetor Rebuild Kit
Price $24.25
Description Complete rebuild kit for the OE 1976 Honda TL125S (not for earlier models) Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle; needle, clip & retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #92; pilot jet, #35.
Motorcycle Model TL125
Motorcycle Manufacturer Honda
Honda TL125K Carburetor Rebuild Kit
Complete rebuild kit for the OE 1973-'75 Honda TL125K Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #95; pilot jet, #38.
Honda TL125K Carburetor Rebuild Kit - $29.75
Complete rebuild kit for the OE 1973-'75 Honda TL125K Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #95; pilot jet, #38.
Motorcycle Model TL125
Motorcycle Manufacturer Honda
   
Honda TL125K Carburetor Rebuild Kit
Price $29.75
Description Complete rebuild kit for the OE 1973-'75 Honda TL125K Keihin carburetor, made in Japan. Includes: Float bowl & top cover gaskets; float needle & seat; needle, clip, retainer; needle jet; air mixture screw & spring; idle screw & spring; o-rings; main jet, #95; pilot jet, #38.
Motorcycle Model TL125
Motorcycle Manufacturer Honda
Fuel Line
Fuel Line - $7.00
Your choice of clear or black fuel line, made of top-quality, non-hardening material. Available in 3/16", 1/4", and 5/16" internal diameters, three-foot lengths and in carburetor vent-tube size, five-foot length.
Fuel Line - $7.00
Your choice of clear or black fuel line, made of top-quality, non-hardening material. Available in 3/16", 1/4", and 5/16" internal diameters, three-foot lengths and in carburetor vent-tube size, five-foot length.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Fuel Line
Price $7.00
Description Your choice of clear or black fuel line, made of top-quality, non-hardening material. Available in 3/16", 1/4", and 5/16" internal diameters, three-foot lengths and in carburetor vent-tube size, five-foot length.
Motorcycle Model Any
Motorcycle Manufacturer Any
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Carburetor Adaptor Plate, Amal Manifold to Spigot Carb - $32.00

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
   
Carburetor Adaptor Plate, Amal Manifold to Spigot Carb
Price $32.00
Description

These adaptor plates bolt-on to an existing head or manifold which was originally intended for an Amal carburetor. The Mikuni rubber flange then bolts to this plate, allowing Mikuni or Amal MkII spigot-mount carburetors to be used. The small plate adapts a 2" stud spacing for 26-34mm carbs; the large plate adapts 65mm spacing to 36-38mm carbs.

Motorcycle Model Any
Motorcycle Manufacturer Any
Bing Float Bowl Gasket
Original cork-type gasket suitable for Type 53, 54, or 84 carbs. Bing part #65-584.
Bing Float Bowl Gasket - $5.00
Original cork-type gasket suitable for Type 53, 54, or 84 carbs. Bing part #65-584.
Motorcycle Model Any
Motorcycle Manufacturer Any, Bultaco, Husqvarna, Maico, Montesa, Penton, Rickman
   
Bing Float Bowl Gasket
Price $5.00
Description Original cork-type gasket suitable for Type 53, 54, or 84 carbs. Bing part #65-584.
Motorcycle Model Any
Motorcycle Manufacturer Any, Bultaco, Husqvarna, Maico, Montesa, Penton, Rickman
Amal/Wassell Slide, Brass
Machined from solid brass, then nickel-plated, this 900-series Concentric slide comes in your choice of 3.0 or 3.5 cutaway.
Amal/Wassell Slide, Brass - $49.00
Machined from solid brass, then nickel-plated, this 900-series Concentric slide comes in your choice of 3.0 or 3.5 cutaway.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Amal/Wassell Slide, Brass
Price $49.00
Description Machined from solid brass, then nickel-plated, this 900-series Concentric slide comes in your choice of 3.0 or 3.5 cutaway.
Motorcycle Model Any
Motorcycle Manufacturer Any
Amal Slide, 1000-Series, Brass

New, machined-from-billet brass carburetor slide for a 34-38mm, 1000-series Amal Concentric carburetor; 3.0 cutaway. Greater cutaways hand-cut at no extra charge.

Amal Slide, 1000-Series, Brass - $79.00

New, machined-from-billet brass carburetor slide for a 34-38mm, 1000-series Amal Concentric carburetor; 3.0 cutaway. Greater cutaways hand-cut at no extra charge.

Motorcycle Model Any, Gold Star, Pursang, Stormer
Motorcycle Manufacturer AJS, Any, BSA, Bultaco
   
Amal Slide, 1000-Series, Brass
Price $79.00
Description

New, machined-from-billet brass carburetor slide for a 34-38mm, 1000-series Amal Concentric carburetor; 3.0 cutaway. Greater cutaways hand-cut at no extra charge.

Motorcycle Model Any, Gold Star, Pursang, Stormer
Motorcycle Manufacturer AJS, Any, BSA, Bultaco
Amal Slide (Throttle Valve)
Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Amal Slide (Throttle Valve) - $30.00
Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Motorcycle Model Any
Motorcycle Manufacturer Any
   
Amal Slide (Throttle Valve)
Price $30.00
Description Original-style replacement slides for Amal Concentric carburetors. Those listed below are in-stock; most others available in a couple of days.
Motorcycle Model Any
Motorcycle Manufacturer Any
 
chemtest.com.ua

www.winnerlex.com.ua

на сайте biceps-ua.com