BSA


BSA made their mark in the English observed trials world with the Gold Star, and continued to have success with the unit-construction C15 and B40. These bikes, along with the two-stroke Bantam, are still favorites with riders and spectators alike.

For general parts, please see the product index on the left.

Parts available for BSA Trials
Viewing 101 to 110 (124 Total)
Sort by:


BSA Gold Star Kickstart Shaft/Cranked Kick Lever
The solution to pre-unit BSA kickstart mechanism problems! Cranked-out kick lever folds nicely against the sidecase, and multiple positions are afforded, all with an massively-positive interface between lever and shaft. The gear from your original shaft is required. We can swap the kickstart top to the 3-inch swing-out, if preferred.
BSA Gold Star Kickstart Shaft/Cranked Kick Lever - $295.00
The solution to pre-unit BSA kickstart mechanism problems! Cranked-out kick lever folds nicely against the sidecase, and multiple positions are afforded, all with an massively-positive interface between lever and shaft. The gear from your original shaft is required. We can swap the kickstart top to the 3-inch swing-out, if preferred.
Motorcycle Model A10, Gold Star
Motorcycle Manufacturer BSA
   
BSA Gold Star Kickstart Shaft/Cranked Kick Lever
Price $295.00
Description The solution to pre-unit BSA kickstart mechanism problems! Cranked-out kick lever folds nicely against the sidecase, and multiple positions are afforded, all with an massively-positive interface between lever and shaft. The gear from your original shaft is required. We can swap the kickstart top to the 3-inch swing-out, if preferred.
Motorcycle Model A10, Gold Star
Motorcycle Manufacturer BSA
Ignition Coil, Universal

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Ignition Coil, Universal - $18.00

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Motorcycle Model Alpina, B25, B40, B44, B50, C15, Cota, Griffon, Matador, Sherpa T, Stormer, Tiger Cub, TL125, TL250, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Cotton, CZ, Greeves, Husqvarna, Maico, Montesa, Ossa, Triumph, Villiers, Yamaha
   
Ignition Coil, Universal
Price $18.00
Description

Believe it or not, this universal use, single lead coil works with 6- or 12-volt, ignitions, either points-type or electronic, unless your existing coil also contains some of the CDI circuitry. It's even compatibible with Lucas Energy Transfer ignitions.

Motorcycle Model Alpina, B25, B40, B44, B50, C15, Cota, Griffon, Matador, Sherpa T, Stormer, Tiger Cub, TL125, TL250, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Cotton, CZ, Greeves, Husqvarna, Maico, Montesa, Ossa, Triumph, Villiers, Yamaha
Clutch Plates, Fiber, Barnett

Legendary performance, made in the USA. Barnett has an extensive selection of clutch plates; please call if you need an item not shown here.

Clutch Plates, Fiber, Barnett - $12.65

Legendary performance, made in the USA. Barnett has an extensive selection of clutch plates; please call if you need an item not shown here.

Motorcycle Model #42, #48, #68, A10, A50, A65, Alpina, B25, B40, B44, B50, C15, Challenger, CR125, CR250, G85, Gold Star, M.A.R., Matador, Metisse, MX250, Phantom, Pursang, RL250, Sherpa T, Stiletto, T100, T120, T140, Tiger Cub, TL125, TM125, TY250, XL250, YZ400
Motorcycle Manufacturer BSA, Bultaco, Greeves, Honda, Husqvarna, Kawasaki, Maico, Matchless, Ossa, Suzuki, Triumph, Yamaha
   
Clutch Plates, Fiber, Barnett
Price $12.65
Description

Legendary performance, made in the USA. Barnett has an extensive selection of clutch plates; please call if you need an item not shown here.

Motorcycle Model #42, #48, #68, A10, A50, A65, Alpina, B25, B40, B44, B50, C15, Challenger, CR125, CR250, G85, Gold Star, M.A.R., Matador, Metisse, MX250, Phantom, Pursang, RL250, Sherpa T, Stiletto, T100, T120, T140, Tiger Cub, TL125, TM125, TY250, XL250, YZ400
Motorcycle Manufacturer BSA, Bultaco, Greeves, Honda, Husqvarna, Kawasaki, Maico, Matchless, Ossa, Suzuki, Triumph, Yamaha
Brake Shoes
Brake Shoes - $16.00

New OEM-type brake shoes. The shoe manufacturer will vary depending on your application and current availability. There are hundreds of different brake shoes available; please call if you don't see what you need. The item you receive may differ from the image.

Brake Shoes - $16.00

New OEM-type brake shoes. The shoe manufacturer will vary depending on your application and current availability. There are hundreds of different brake shoes available; please call if you don't see what you need. The item you receive may differ from the image.

Motorcycle Model A10, A50, A65, Any, B25, B44, Gold Star, M.A.R., Metisse, Micro Metisse, MkIII, MkIV, Pursang, RL250, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TM125, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Honda, Husqvarna, Kawasaki, Ossa, Rickman, Suzuki, Triumph, Yamaha
   
Brake Shoes
Price $16.00
Description

New OEM-type brake shoes. The shoe manufacturer will vary depending on your application and current availability. There are hundreds of different brake shoes available; please call if you don't see what you need. The item you receive may differ from the image.

Motorcycle Model A10, A50, A65, Any, B25, B44, Gold Star, M.A.R., Metisse, Micro Metisse, MkIII, MkIV, Pursang, RL250, Sherpa T, Tiger Cub, TL125, TL250, TLR200/Reflex, TM125, TY175, TY250, TY80
Motorcycle Manufacturer BSA, Bultaco, Honda, Husqvarna, Kawasaki, Ossa, Rickman, Suzuki, Triumph, Yamaha

Available for Bultaco Pursang and Sherpa T, BSA, Husky, Montesa and Yamaha. Made in black vinyl, with brand logo where appropriate. Models shown below are currently in stock; others by special order.

Seat Covers, Factory Replica - $45.00

Available for Bultaco Pursang and Sherpa T, BSA, Husky, Montesa and Yamaha. Made in black vinyl, with brand logo where appropriate. Models shown below are currently in stock; others by special order.

Motorcycle Model Any, Gold Star, Pursang, Sherpa T, TY175
Motorcycle Manufacturer BSA, Bultaco, Husqvarna, Montesa, Yamaha
   
Seat Covers, Factory Replica
Price $45.00
Description

Available for Bultaco Pursang and Sherpa T, BSA, Husky, Montesa and Yamaha. Made in black vinyl, with brand logo where appropriate. Models shown below are currently in stock; others by special order.

Motorcycle Model Any, Gold Star, Pursang, Sherpa T, TY175
Motorcycle Manufacturer BSA, Bultaco, Husqvarna, Montesa, Yamaha
Clutch Springs, Heavy-Duty

Available for three- or four-spring BSA and Triumph twin clutches, and most Bultacos. Sold as a set.

Clutch Springs, Heavy-Duty - $11.00

Available for three- or four-spring BSA and Triumph twin clutches, and most Bultacos. Sold as a set.

Motorcycle Model A10, A50, A65, Alpina, Gold Star, Matador, Metisse, Pursang, Sherpa T, T100, T120, T140, TR6
Motorcycle Manufacturer BSA, Bultaco, Triumph
   
Clutch Springs, Heavy-Duty
Price $11.00
Description

Available for three- or four-spring BSA and Triumph twin clutches, and most Bultacos. Sold as a set.

Motorcycle Model A10, A50, A65, Alpina, Gold Star, Matador, Metisse, Pursang, Sherpa T, T100, T120, T140, TR6
Motorcycle Manufacturer BSA, Bultaco, Triumph
Clutch Plates, Steel, Barnett

Made in the USA from only the best materials. Available for BSA, Husqvarna and Triumph. Sold individually. The entire line of Barnett products is available; please call with your needs.

Clutch Plates, Steel, Barnett - $7.50

Made in the USA from only the best materials. Available for BSA, Husqvarna and Triumph. Sold individually. The entire line of Barnett products is available; please call with your needs.

Motorcycle Model A10, A50, A65, B25, B40, B44, B50, C15, Gold Star, T100, T120, Tiger Cub, TR6
Motorcycle Manufacturer BSA, Husqvarna, Triumph
   
Clutch Plates, Steel, Barnett
Price $7.50
Description

Made in the USA from only the best materials. Available for BSA, Husqvarna and Triumph. Sold individually. The entire line of Barnett products is available; please call with your needs.

Motorcycle Model A10, A50, A65, B25, B40, B44, B50, C15, Gold Star, T100, T120, Tiger Cub, TR6
Motorcycle Manufacturer BSA, Husqvarna, Triumph
Clutch Pressure Plate, Alloy
Billet aluminum-alloy clutch pressure plates are stiffer than stock, providing superior clutch action. In-stock items listed below, others available upon request.
Clutch Pressure Plate, Alloy - $55.00
Billet aluminum-alloy clutch pressure plates are stiffer than stock, providing superior clutch action. In-stock items listed below, others available upon request.
Motorcycle Model B25, B40, B44, B50, C15, T100, T120, T140, TR6
Motorcycle Manufacturer BSA, Matchless, Triumph
   
Clutch Pressure Plate, Alloy
Price $55.00
Description Billet aluminum-alloy clutch pressure plates are stiffer than stock, providing superior clutch action. In-stock items listed below, others available upon request.
Motorcycle Model B25, B40, B44, B50, C15, T100, T120, T140, TR6
Motorcycle Manufacturer BSA, Matchless, Triumph
Clutch Plates, NEB
Replacement fiber clutch plates for the NEB aftermarket six-spring clutch, as available for BSA, Triumph, Matchless, etc.
Clutch Plates, NEB - $15.00
Replacement fiber clutch plates for the NEB aftermarket six-spring clutch, as available for BSA, Triumph, Matchless, etc.
Motorcycle Model B25, B40, B44, B50, C15, G85, Gold Star, T100, T120, T140
Motorcycle Manufacturer BSA, Matchless, Triumph
   
Clutch Plates, NEB
Price $15.00
Description Replacement fiber clutch plates for the NEB aftermarket six-spring clutch, as available for BSA, Triumph, Matchless, etc.
Motorcycle Model B25, B40, B44, B50, C15, G85, Gold Star, T100, T120, T140
Motorcycle Manufacturer BSA, Matchless, Triumph
AMC/BSA/Triumph High-Gear Bearing
High-gear bearing (commonly called countershaft bearing in the US) for AJS/Matchless/Norton singles and twins with AMC gearbox (OE Part #040098), for BSA A50/A65 (68-0023), and for pre-unit Triumphs and four-speed unit 650 Triumphs (57-0448). Seals pop-out easily to run as an open bearing.
AMC/BSA/Triumph High-Gear Bearing - $24.00
High-gear bearing (commonly called countershaft bearing in the US) for AJS/Matchless/Norton singles and twins with AMC gearbox (OE Part #040098), for BSA A50/A65 (68-0023), and for pre-unit Triumphs and four-speed unit 650 Triumphs (57-0448). Seals pop-out easily to run as an open bearing.
Motorcycle Model A50, A65, G85, T120, TR6
Motorcycle Manufacturer BSA, Matchless, Triumph
   
AMC/BSA/Triumph High-Gear Bearing
Price $24.00
Description High-gear bearing (commonly called countershaft bearing in the US) for AJS/Matchless/Norton singles and twins with AMC gearbox (OE Part #040098), for BSA A50/A65 (68-0023), and for pre-unit Triumphs and four-speed unit 650 Triumphs (57-0448). Seals pop-out easily to run as an open bearing.
Motorcycle Model A50, A65, G85, T120, TR6
Motorcycle Manufacturer BSA, Matchless, Triumph
 
www.velotime.com.ua

упаковка подарочная

Купить Meizu M5 Note