Montesa


Not long after the first Montesa Cota trials models appeared in 1967, Montesa's chief development engineer, Pedro Pi, won the Spanish Trials Championship. Cotas have continuously been involved in observed trials since that time, amassing an incredible number of event and championship wins.

Above, Matt on a Cota 247, Dick Mann Vintage Dirt Bike Rally, likely 1988. Many bikes carry a tall tale; this one was supposedly given to Malcolm Smith as a thank-you for his use of a Cota in "On Any Sunday," although not the actual bike in the film. I had no reason to believe that story, and didn't keep track of where the bike went when it left my hands. Kinda diggin' the sweatpants, though.

For general parts, please see the product index on the left.

Parts available for Montesa Trials
Viewing 21 to 30 (76 Total)
Sort by:


Drain Plug Washer, Aluminum
Soft aluminum 14mm drain-plug sealing washer has 22mm o.d. and is 2mm thick. Fits many machines, including Bultaco gearbox and primary drain plugs.
Drain Plug Washer, Aluminum - $0.70
Soft aluminum 14mm drain-plug sealing washer has 22mm o.d. and is 2mm thick. Fits many machines, including Bultaco gearbox and primary drain plugs.
Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, Matador, Metisse, Pursang, Sherpa T
Motorcycle Manufacturer Any, Bultaco, Honda, Montesa
   
Drain Plug Washer, Aluminum
Price $0.70
Description Soft aluminum 14mm drain-plug sealing washer has 22mm o.d. and is 2mm thick. Fits many machines, including Bultaco gearbox and primary drain plugs.
Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, Matador, Metisse, Pursang, Sherpa T
Motorcycle Manufacturer Any, Bultaco, Honda, Montesa
Fork Caps, Betor w/Schrader Valve

Pair of billet fork caps to fit 35mm Betor stanchions. Fitted with Schrader valve to bleed-off built-up air or to add air for increased effective spring rate.

Fork Caps, Betor w/Schrader Valve - $75.00

Pair of billet fork caps to fit 35mm Betor stanchions. Fitted with Schrader valve to bleed-off built-up air or to add air for increased effective spring rate.

Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, Matador, Metisse, Pursang, Sherpa T
Motorcycle Manufacturer Any, Bultaco, Montesa
   
Fork Caps, Betor w/Schrader Valve
Price $75.00
Description

Pair of billet fork caps to fit 35mm Betor stanchions. Fitted with Schrader valve to bleed-off built-up air or to add air for increased effective spring rate.

Motorcycle Model #18, #42, #48, #68, Alpina, Any, Cota, Matador, Metisse, Pursang, Sherpa T
Motorcycle Manufacturer Any, Bultaco, Montesa
Cables, Front Brake, Nylon-Lined, European

Several of the most popular front brake cables are listed below. Let us know if you need something not shown here.

Cables, Front Brake, Nylon-Lined, European - $18.00

Several of the most popular front brake cables are listed below. Let us know if you need something not shown here.

Motorcycle Model #18, #42, #48, #68, Alpina, Cota, M.A.R., Matador, Metisse, Sherpa T
Motorcycle Manufacturer Bultaco, CZ, Husqvarna, Maico, Montesa, Ossa, Penton
   
Cables, Front Brake, Nylon-Lined, European
Price $18.00
Description

Several of the most popular front brake cables are listed below. Let us know if you need something not shown here.

Motorcycle Model #18, #42, #48, #68, Alpina, Cota, M.A.R., Matador, Metisse, Sherpa T
Motorcycle Manufacturer Bultaco, CZ, Husqvarna, Maico, Montesa, Ossa, Penton
Condensors
Condensors - $10.00

OE replacement condensors. Many others are available; please call with other requirements.

Condensors - $10.00

OE replacement condensors. Many others are available; please call with other requirements.

Motorcycle Model #18, #42, #48, 9E-37A, A50, A65, Alpina, Anglian, B25, B40, B44, B50, C15, Challenger, Cota, Griffon, Hawkstone/MCS, Matador, Metisse, Micro Metisse, Scottish, Sherpa T, Stormer, T100, T120, T140, Tiger Cub, TR6, TY175, TY250, TY80
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Rickman, Triumph, Villiers, Yamaha
   
Condensors
Price $10.00
Description

OE replacement condensors. Many others are available; please call with other requirements.

Motorcycle Model #18, #42, #48, 9E-37A, A50, A65, Alpina, Anglian, B25, B40, B44, B50, C15, Challenger, Cota, Griffon, Hawkstone/MCS, Matador, Metisse, Micro Metisse, Scottish, Sherpa T, Stormer, T100, T120, T140, Tiger Cub, TR6, TY175, TY250, TY80
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Rickman, Triumph, Villiers, Yamaha
Electronic Ignition System, Electrex

UK-made, self-generating CDI ignition with electronic advance, available for a wide range of machines, allowing easy starting and maximum performance. Current inventory is indicated next to the application; items not in stock take approximately eight days before shipping.

Electronic Ignition System, Electrex - $235.00

UK-made, self-generating CDI ignition with electronic advance, available for a wide range of machines, allowing easy starting and maximum performance. Current inventory is indicated next to the application; items not in stock take approximately eight days before shipping.

Motorcycle Model #42, #48, #68, 9E-37A, A50, A65, Anglian, B25, B40, B44, B50, C15, Challenger, Cota, Griffon, Hawkstone/MCS, Metisse, Pursang, Scottish, Stormer, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Triumph, Villiers
   
Electronic Ignition System, Electrex
Price $235.00
Description

UK-made, self-generating CDI ignition with electronic advance, available for a wide range of machines, allowing easy starting and maximum performance. Current inventory is indicated next to the application; items not in stock take approximately eight days before shipping.

Motorcycle Model #42, #48, #68, 9E-37A, A50, A65, Anglian, B25, B40, B44, B50, C15, Challenger, Cota, Griffon, Hawkstone/MCS, Metisse, Pursang, Scottish, Stormer, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Triumph, Villiers
Contact Points
Contact Points - $10.00

New points set for OE applications. Our normal stock is listed below, but dozens of others are available on short notice; please call.

Contact Points - $10.00

New points set for OE applications. Our normal stock is listed below, but dozens of others are available on short notice; please call.

Motorcycle Model #42, #48, 9E-37A, A50, A65, Alpina, Anglian, B25, B40, B44, B50, Challenger, Cota, Hawkstone/MCS, Matador, Metisse, Scottish, Sherpa T, Stormer, T100, T120, T140, Tiger Cub, TR6, TY175, TY250, TY80
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Rickman, Triumph, Villiers, Yamaha
   
Contact Points
Price $10.00
Description

New points set for OE applications. Our normal stock is listed below, but dozens of others are available on short notice; please call.

Motorcycle Model #42, #48, 9E-37A, A50, A65, Alpina, Anglian, B25, B40, B44, B50, Challenger, Cota, Hawkstone/MCS, Matador, Metisse, Scottish, Sherpa T, Stormer, T100, T120, T140, Tiger Cub, TR6, TY175, TY250, TY80
Motorcycle Manufacturer AJS, BSA, Bultaco, Cotton, Greeves, Husqvarna, Montesa, Rickman, Triumph, Villiers, Yamaha
Rubber Flange Adaptor, Amal Bolt Pattern
Rubber flange adaptor to install spigot-mount carburetors directly to a manifold or head designed for Amal carburetors. No need for conversion adaptor plates or other modifications. The small version has a bolt spacing of 2", and accepts 2600-series Amal MkIIs and VM26 Mikunis. The large version has a bolt spacing of 65mm, and accepts 2000-series Amal MkIIs and VM36/38 Mikunis.
Rubber Flange Adaptor, Amal Bolt Pattern - $50.00
Rubber flange adaptor to install spigot-mount carburetors directly to a manifold or head designed for Amal carburetors. No need for conversion adaptor plates or other modifications. The small version has a bolt spacing of 2", and accepts 2600-series Amal MkIIs and VM26 Mikunis. The large version has a bolt spacing of 65mm, and accepts 2000-series Amal MkIIs and VM36/38 Mikunis.
Motorcycle Model 9E-37A, Alpina, Anglian, Any, B25, B40, C15, Cota, M.A.R., Scottish, Sherpa T, Tiger Cub
Motorcycle Manufacturer Any, BSA, Bultaco, Cotton, Greeves, Montesa, Ossa, Triumph, Villiers
   
Rubber Flange Adaptor, Amal Bolt Pattern
Price $50.00
Description Rubber flange adaptor to install spigot-mount carburetors directly to a manifold or head designed for Amal carburetors. No need for conversion adaptor plates or other modifications. The small version has a bolt spacing of 2", and accepts 2600-series Amal MkIIs and VM26 Mikunis. The large version has a bolt spacing of 65mm, and accepts 2000-series Amal MkIIs and VM36/38 Mikunis.
Motorcycle Model 9E-37A, Alpina, Anglian, Any, B25, B40, C15, Cota, M.A.R., Scottish, Sherpa T, Tiger Cub
Motorcycle Manufacturer Any, BSA, Bultaco, Cotton, Greeves, Montesa, Ossa, Triumph, Villiers
Gasket Sets
Gasket Sets - $12.00

Listed below are some of the gasket sets we have in stock. There is a broad array of applications readily available; if you don't see what you need, please call.

Gasket Sets - $12.00

Listed below are some of the gasket sets we have in stock. There is a broad array of applications readily available; if you don't see what you need, please call.

Motorcycle Model 9E-37A, Anglian, Any, B40, B44, B50, C15, Cota, G85, Hawkstone/MCS, MkIII, MkIV, Pursang, Sherpa T, Stormer, T100, T120, Tiger Cub, TL250, TR6, TY175, TY80
Motorcycle Manufacturer AJS, Any, BSA, Bultaco, Cotton, Greeves, Honda, Matchless, Montesa, Triumph, Villiers, Yamaha
   
Gasket Sets
Price $12.00
Description

Listed below are some of the gasket sets we have in stock. There is a broad array of applications readily available; if you don't see what you need, please call.

Motorcycle Model 9E-37A, Anglian, Any, B40, B44, B50, C15, Cota, G85, Hawkstone/MCS, MkIII, MkIV, Pursang, Sherpa T, Stormer, T100, T120, Tiger Cub, TL250, TR6, TY175, TY80
Motorcycle Manufacturer AJS, Any, BSA, Bultaco, Cotton, Greeves, Honda, Matchless, Montesa, Triumph, Villiers, Yamaha
Amal Concentric Flange O-Ring
Mounting-flange o-ring for Amal Concentric carburetors that require such a thing -- typically British and a few Spanish carbs, but not OE Bultaco. #622/101
Amal Concentric Flange O-Ring - $1.25
Mounting-flange o-ring for Amal Concentric carburetors that require such a thing -- typically British and a few Spanish carbs, but not OE Bultaco. #622/101
Motorcycle Model A10, A50, A65, Anglian, Any, B25, B40, B44, B50, C15, Challenger, Cota, G85, Gold Star, Griffon, HT5, MkIII, MkIV, Q.U.B., Stormer, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, Any, Ariel, BSA, Cotton, Greeves, Matchless, Montesa, Rickman, Triumph
   
Amal Concentric Flange O-Ring
Price $1.25
Description Mounting-flange o-ring for Amal Concentric carburetors that require such a thing -- typically British and a few Spanish carbs, but not OE Bultaco. #622/101
Motorcycle Model A10, A50, A65, Anglian, Any, B25, B40, B44, B50, C15, Challenger, Cota, G85, Gold Star, Griffon, HT5, MkIII, MkIV, Q.U.B., Stormer, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, Any, Ariel, BSA, Cotton, Greeves, Matchless, Montesa, Rickman, Triumph
Alloy Fenders
Alloy Fenders - $102.00

Polished aluminum alloy fenders have a rolled bead at one end. They are undrilled, and normally require trimming for length and component clearance. Very nice fenders with a huge range of applications. Four sizes available (see drop-down menu). Sold individually.

Alloy Fenders - $102.00

Polished aluminum alloy fenders have a rolled bead at one end. They are undrilled, and normally require trimming for length and component clearance. Very nice fenders with a huge range of applications. Four sizes available (see drop-down menu). Sold individually.

Motorcycle Model A10, A65, Alpina, Anglian, Any, B25, B40, B44, B50, C15, Challenger, Cota, G85, Gold Star, Griffon, Hawkstone/MCS, HT5, M.A.R., Matador, Scottish, Sherpa T, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, Any, Ariel, BSA, Bultaco, Cotton, Greeves, Husqvarna, Maico, Matchless, Montesa, Ossa, Penton, Triumph
   
Alloy Fenders
Price $102.00
Description

Polished aluminum alloy fenders have a rolled bead at one end. They are undrilled, and normally require trimming for length and component clearance. Very nice fenders with a huge range of applications. Four sizes available (see drop-down menu). Sold individually.

Motorcycle Model A10, A65, Alpina, Anglian, Any, B25, B40, B44, B50, C15, Challenger, Cota, G85, Gold Star, Griffon, Hawkstone/MCS, HT5, M.A.R., Matador, Scottish, Sherpa T, T100, T120, T140, Tiger Cub, TR6
Motorcycle Manufacturer AJS, Any, Ariel, BSA, Bultaco, Cotton, Greeves, Husqvarna, Maico, Matchless, Montesa, Ossa, Penton, Triumph
 
http://fiat.niko.ua/models/cars/fiat-new-doblo-panorama-my15/

подробно

Вы можете Провимед купить в любом городе.